Panel PCs

EDT1700T 17" EnduraTouch II Enclosed Computer

17" EnduraTouch II Fully Enclosed, Stainless Steel Computer

The Nematron EnduraTouch II is the latest update to the original EnduraTouch Series launched by Comark in the early 2000’s. The EDT1700T is a 17” fully-enclosed computer with a stainless steel enclosure and many great features for using this product in industrial automation applications. The EnduraTouch II EDT1700T is intended for use in areas where the NEMA 4/4X, IP66 rating is required, such as in food processing or chemical plants that utilize washdown sprays for cleaning equipment. The EDT1700 comes with a chemically-strengthened analog resistive touchscreen, a Fanless, Intel Quad Core ATOM E3845 CPU board and Solid State Drive storage, and has been tested and proven to run up to 60°C temperature specs. The EDT1700T is ETL Approved to UL61010 & CSA61010 Ordinary Locations.

Product Number: EnduraTouch II EDT1700T
Brand: Nematron
Industry: Industrial Automation

Features:

  • ETL Approved to UL61010 & CSA61010 Ordinary Locations
  • Stainless Steel Fully Enclosed
  • Intel® Fanless Processing
  • LED Backlit Display
  • Chemically-Strengthened Analog Resistive Touchscreen
  • Solid State Drive Storage
  • NEMA 4/4X, IP66
  • Windows 64-bit Application Support
Display

Resolution: SXGA, 1280 x 1024
Brightness: 350 nit
Viewing Angle (H/V): 170°/170°
Colors: 16 million
Contrast Ratio: 1000:1
Backlight: LED
Screen Protection: Chemically-Strengthened Glass
Touchscreen: 5-wire Analog Resistive

Processor

Type & Processor: Intel Quad Core ATOM E3845
CPU: 1.86 GHz, 1MB Cache, 4 Threads
Operating System: Windows 7 Professional (32-bit) pre-installed; optional Windows 7 Ultimate (64-bit), Windows 10 Enterprise IoT (32-bit or 64-bit)

I/O Interface
I/O Ports: (2) Gigabit (10/100/1000) Ethernet ports, (1) RS-232/422/485 serial port (jumper selectable), (3) RS-232 serial ports, (4) USB 2.0 ports
Peripherals
Storage: 240 GB SATA Solid State Drive; optional 480 GB SATA or 960 GB SATA Solid State Drives, or 1TB SATA Hybrid Hard Drive
Memory: 4 GB DRAM; optional 8 GB DRAM
Dimensions

Dimensions (inch): 16.0” x 13.33” x 4.95”
Dimensions (mm): 406.4mm x 338.58mm x 125.73mm
Weight: 22.0 lbs (9.98 kg)
Mounting: VESA, 100 x 100 on rear of enclosure; Custom mounting – Covered and sealed mounting holes on sides can be used for custom mounting applications

Material
Enclosure: Stainless Steel Fully Enclosed
Electrical

Voltage: Integrated 100-240 VAC; optional isolated 24 VDC
Power Consumption: 50 Watts

Certifications

NEMA Rating: NEMA 4/4X, IP66 Sealed Dust Caps for I/O connectors (N/A on power connector)
FCC: 47 CFR, Part 15, Class A
EU CE Marking: CE, EN 55011: Class A, EN 61000-3-3, EN 61000-6-2, IEC 60950-1
Agency Approvals: ETL Approved to UL61010 & CSA61010 Ordinary Locations

Environmental
Temperature operating: 0 – 60°C
Options
Cables and Kits Sold Separately:
CBL-EDT-USB2-IP66-5M: IP66 Dual USB 2.0 Cable for EnduraTouch II, IP66 rated (one end only), 5M length (2 max required on EnduraTouch II)
CBL-EDT-ENET-IP66-5M: IP66 Ethenet Cable for EnduraTouch II, IP66 rated (one end only), 5M length (2 max required on EnduraTouch II)
CBL-EDT-SER-IP66-5M: IP66 Serial Cable for EnduraTouch II, IP66 rated (one end only), 5M length (4 max required on EnduraTouch II)
CBL-EDT-I/O-IP66-5M: I/O cable set for Enduratouch II, All cables are IP66 rated (one end only), Includes two dual USB 2.0, four Serial, and two ENET, All 5M Length. Note: does not include PWR cable
CBL-EDT-PWR-IP66-2M: IP66 Power Cable for EnduraTouch II, IP66 rated (one end only), 2M length (flying leads that need to be wired differently for AC and DC power)
50-16854-001: Connector Kit for field wiring connections to the EnduraTouch II; includes One power connector, Six connectors for Ethenet and/or Serial, and two connectors for USB. Also includes connector pin out diagrams. NOTE: These are the connector housings only and do not include any cabling
24-17267-001: One (1) Connector housing only for field wiring of Power to the EnduraTouch unit. Note: Consult EnduraTouch II manual for pin out diagram
24-17263-001: One (1) Connector housing only for field wiring of Ethernet and/or Serial Ports to the EnduraTouch II unit. Note: Consult EnduraTouch II manual for pin out diagram
24-17266-001: One (1) Connector housing only for field wiring of USB ports to the EnduraTouch II unit. Note: Consult EnduraTouch II manual for pin out diagram

Fill out the form below and a member of our team will get back to you within 1 business day.

Name*

Company

Email*

Phone

Product of Interest

Notes: